View MWR10D6_1392689.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this unit can record to the following disc types. i this unit formats discs with dvd+vr mode. i dvd-r/dvd+r discs can only be recorded to once. dvd+rw/dvd-rw discs can be recorded to and erased many times. i discs that have been tested and are proven to be compatible with this recorder: verbatim dvd+r 8x, verbatim dvd+rw 4x verbatim dvd-r 8x, verbatim dvd-rw 2x, maxell dvd-r 16x, jvc dvd-rw 4x i we strongly recommend for good recording quality: tdk dvd+r 4x/8x/16x, sony dvd+r 4x/8x/16x, maxell dvd+r 4x/8x/16x, sony dvd+rw 4x, maxell dvd-r 8x/16x, maxell dvd-rw 4x 1 connections 2 setup follow to the back side of this sheet. this unit is compatible to play the following discs. logo attrib utes 8cm/12cm, single-sided, single la y er disc appr ox . max. recording time (slp mode) : 360 minutes (4.7gb) (f or 12cm ) 108 minutes (1.4gb) (f or 8cm) dv d+r w dv d+r 8cm/12cm, single-sided, single la y er disc appr ox . max . recording time (slp mode) : 360 minutes (4.7gb) (f or 12cm ) 108 minutes (1.4gb) (f or 8cm) dv d-r w dv d- r logo attri bu te s dv d- rw (video mode, finalized ) logo disc d vd-video d vd+ rw d vd+r d vd+r doub le la ye r dvd- r (video mode, finalized) cd- da (a udio cd) logo disc cd-r (cd- da form at, mp3 files ) video cd cd- rw (cd- da form at, mp3 files ) the number inside the globe refers to region of the world. this unit can play dvds that are labeled for all regions or for region 1. MWR10D6 2 C 1 watching on tv 2 C 2 initial setup press [standby-on ] to turn the unit on. 1. switch the input selector on your tv to an appropriate external input channel (usually near channel 0). 2. press a button on the tvs original remote control (see the table below) to select an external input channel until the dvd recorders picture appears. admiral cur tis mathis ge hitachi jvc ke nw ood lxi-series magna vox au x line1, line2, 00, 90, 91, 92, 93 input , tv/vcr, 00, 90, 91, 92, 93 input , au x video , video1, video2, video3 au x 00 a ux channel input mode names f or common tv brands pa nasonic rca samsung san yo sharp son y to shiba zenith tv/video inpu t, tv/vcr, 00, 90, 91, 92, 93 tv/vide o vide o 00 video1, video2, video3 tv/game 00 dvd recorder p l a y a b l e d i s c s r e g i o n c o d e s r e c o r d a b l e d i s c s is a trademar k of dv d fo rm at/logo licensing cor por ation. i both a/v and rf cables must be connected to the tv for operation. i see front page of the owner's manual for the connection with the rf modulator. set up the following items when turning on the unit for the first time. press [ok] to clock setting. using [ k / l ] , enter the date (month / day / year). press [ { / b ] to move the cursor. press [ok] . tv program will automatically appear. (usually near channel 0) antenna au dio in video in l r au dio out video out (e1) in in out out s-video component video output l y p b /c b p r /c r r digit al a udio output pcm / bitstream co axial a udio in video rf cab le (not supplied) rf cab le (supplied) video cab le (supplied) a udio cab le (supplied) (bac k of tv) or cab le tv signal connect connect connect connect antenna (bac k of this unit) 2 1 3 4 in out (cab le bo x or satellite bo x) remote control initial setup fran?ai s espa?ol englis h initial setup channel preset a uto presetting no w ch 1 using [ k / l ] , select your desired language and press [ok] . press [ok] to channel preset. then the unit will start getting available channels in your area. initial setup ---- / -- / ---- ( ---- ) -- : ---- initial setup j an / 01 / 2006 ( sun ) 12: 00 am press [ok] again. initial setup cloc k setting antenna au dio in video in l r au dio out video out (e1) in in out out s-video component video output l y p b /c b p r /c r r digit al a udio output pcm / bitstream co axial a udio in video rf cab le (not supplied) rf cab le (supplied) video cab le (supplied) a udio cab le (supplied) (bac k of tv) or cab le tv signal connect connect connect connect antenna (bac k of this unit) 2 1 3 4 in out (cab le bo x or satellite bo x)
press repeatedly to select desired recording time. 3 C 2 timer recording after all recordings, finalize your disc! finalize dvd-rw/-r/+r discs after recording. make edits compatible on dvd+rw discs after editing. select the recording mode. record! select the desired channel. stop recording. press [timer prog.]. ? you can set up to 8 programs (once, daily or weekly). ? be sure to set the clock before starting a timer programming. timer programming list appears. select any blank line with [ k / l ] and press [ok]. timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. --- date start end ch mode 1vmn21953 / e7a60ud_qg rrecording times appear on the tv screen (30 minutes to 8 hours). recording will start. when the unit reaches the specified time, the unit will be turned off automatically. how to select the recording mode: recor ding mode hq (1hr) sp (2hr) spp (2.5hr) lp (3hr) ep (4hr) slp (6hr) recor ding time 18 min 36 min 45 min 54 min 72 min 108 min video/sound quality disc siz e 8cm disc hq (1hr) sp (2hr) spp (2.5hr) lp (3hr) ep (4hr) slp (6hr) 60 min 120 min 150 min 180 min 240 min 360 min 12cm disc (poor) (poor) (good) (good) 3 C 1 easy recording 3 dvd recording 0:30 (normal recor ding) 8:00 7:30 1:00 i 0:30 this unit dv d pla ye r not pl ay ab le pl ay ab le d vd-r w/d vd-r dv d+ r dv d+ rw d????????h d????????h k??>c????>a????????h k??>c????>a????????h hw??>?????>???????>??>k??>c????>a????????>??>?????>btb>???? ?????l editing title s not finaliz ed not perf or ming mak e edits compatib le after editing title s enter! turn off the unit to set the timer standby mode. timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. --- date start end ch mode set the date. timer pr ogramming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 --:-- --:-- e1 date start end ch mode timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 12:57am --:-- e1 date start end ch mode timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 12:57am 1:57am ch 8 date start end ch mode timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 12:57am 1:57am ch 8 hq date start end ch mode set start and end time. select the channel number to record. select the recording mode. 4 playback timer recording is now set. timer rec indicator will be on. disc tr ay guide open the disc tray. insert a disc. play! stop playing. if the title menu appears, using [ k / l ] , select a title and press [ok] . (then select play with [ k / l ] when playing titles recorded by this unit. )
to tv channel video in au dio in r l 3 4 ant in ac 120v stereo a udio/video rf modulator (commercially av ailab le) (bac k of tv) antenna in jac k (commercially av ailab le) antenna au dio in video in l r au dio out video out (e1) in in out out s-video component video output l y p b /c b p r /c r r (bac k of this unit) au dio/video cab les (supplied) rf cab le rf cab le (supplied) antenna cab le tv signal 3 4 6 5 2 1 set channel 3 or 4. tu rn on y our tv and select channel 3 or 4. note ? the quality of picture may become poor if this unit is connected to an rf modulator. recording playing discs editing before you start connections getting started changing the setup menu others espa?ol please read before using this equipment. if you need additional operating assistance after reading this owners manual or to order replacement accessories, please call toll free : 1 800-605-8453 or visit our web site at http://www.funai-corp.com instrucciones en espa?ol incluidas owners manual MWR10D6 connection to a tv ( before you use this unit, you need to complete connections.) if your tv has audio/video input jacks, see the section connections on pages 13C15. if not, it is still possible to connect this unit to your tv by using a stereo audio/video rf modulator (commercially available). in this case, follow the instructions below. 1) the antenna input jack of your tv may have been already occupied. if so, disconnect the rf cable from your tv, and then connect the rf cable to the antenna in jack of this unit. 2) connect the antenna out jack of this unit to your rf modulator (usually marked ant in) by the rf cable. 3) connect your rf modulator to your tv by another rf cable. 4) connect the audio/video output jacks of this unit to the audio/video input jacks of your rf modulator by audio and video cables. 5) set your rf modulators channel 3/4 switch to either 3 or 4, whichever the tv channel is least used in your area. if your rf modulator has a modulator/antenna switch, set it according to your rf modulators manual. 6) turn on your tv and choose the same channel as you set the rf modulators channel 3/4 switch to. for more details, follow the instructions supplied with the rf modulator. dvd recorder to record a program easily, refer to easy dvd recording on pages 16-17 after connections are completed. (you cannot record on any copyright protected dvd disc with this unit.) recordable disc ? we strongly recommend for good recording quality: tdk dvd+r 4x/8x/16x, sony dvd+r 4x/8x/16x, maxell dvd+r 4x/8x/16x, sony dvd+rw 4x, maxell dvd-r 8x/16x, maxell dvd-rw 4x ? discs that have been tested and are proven to be compatible with this recorder: verbatim dvd+r 8x , verbatim dvd+rw 4x , verbatim dvd-r 8x , verbatim dvd-rw 2x , maxell dvd-r 16x , jvc dvd-rw 4 x
2 en precautions laser safety this unit employs a laser. only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. caution: use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. caution: visible and invisible laser radiation when open and interlock defeated. do not stare into beam. location: inside, near the deck mechanism. warning: to reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magni - tude to constitute a risk of electric shock to persons. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and mainte - nance (servicing) instructions in the literature accompanying the appliance. caution : to reduce the risk of electric shock, do not remove cover (or back). no user serviceable parts inside. refer servicing to qualified service personnel. caution risk of electric shock do not open radio-tv interference this equipment has been tested and found to comply with the limits for a class b digital device, pursuant to part 15 of the fcc rules. these limits are designed to provide reasonable protection against harmful interference in a residen - tial installation. this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. however, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna. 2) increase the separation between the equipment and receiver. 3) connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) consult the dealer or an experienced radio/tv technician for help. this class b digital apparatus complies with canadian ices-003. cet appareil numrique de la classe b est conforme la norme nmb-003 du canada. fcc warning - this equipment may generate or use radio frequency energy. changes or modi - fications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. the user could lose the authority to operate this equipment if an unauthor - ized change or modification is made. caution: to prevent electric shock, match wide blade of plug to wide slot, fully insert. attention: pour viter les choc lectriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusquau fond . a note about recycling this products packaging materials are recyclable and can be reused. please dispose of any materials in accordance with your local recycling regulations. batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemi - cal wastes. for customer use: read carefully the information located at the back of this unit and enter below the model no. and serial no. retain this information for future reference. model no. _____________________ serial no. _____________________ make your contribution to the environment!!! ? used up batteries do not belong in the dust bin. ? you can dispose of them at a collection point for used up batteries or special waste. contact your council for details. before you start
3 en recording playing discs editing getting started changing the setup menu others espa?ol before you start connections precautions (contd) important safeguards 1. read instructions - all the safety and operating instructions should be read before the appliance is operated. 2. retain instructions- the safety and operating instructions should be retained for future reference. 3. heed warnings - all warnings on the appliance and in the operating instructions should be adhered to. 4. follow instructions - all operating and use instructions should be followed. 5. cleaning - unplug this product from the wall outlet before cleaning. do not use liquid cleaners or aerosol cleaners. use a damp cloth for cleaning. exception: a product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a catv converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. attachments - do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. water and moisture- do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. accessories - do not place this product on an unstable cart, stand, tripod, bracket, or table. the product may fall, causing serious injury to a child or adult, and serious damage to the appliance. use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. an appliance and cart combination should be moved with care. quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 9. ventilation - slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. the openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. this product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 10. power sources - this product should be operated only from the type of power source indicated on the marking label. if you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. for products intended to operate from battery power, or other sources, refer to the operating instructions. 11. grounding or polarization - this product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). this plug will fit into the power outlet only one way. this is a safety feature. if you are unable to insert the plug fully into the outlet, try reversing the plug. if the plug should still fail to fit, contact your electrician to replace your obsolete outlet. do not defeat the safety purpose of the polarized plug. 12. power cord protection - power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. outdoor antenna grounding - if an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. article 810 of the national electrical code, ansi/ nfpa no. 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (fig. a) 14. lightning - for added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. this will prevent damage to the product due to lightning and power-line surges. 15. power lines - an outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. when installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. overloading - do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. object and liquid entry - never push objects of any kind into this product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. never spill liquid of any kind on the product. 18. servicing - do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. refer all servicing to qualified service personnel. 19. damage requiring service - unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. when the power-supply cord or plug is damaged. b. if liquid has been spilled, or objects have fallen into the product. c. if the product has been exposed to rain or water. d. if the product does not operate normally by following the operating instructions. adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. if the product has been dropped or damaged in any way. f. when the product exhibits a distinct change in performance this indicates a need for service. 20. replacement parts - when replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. unauthorized substitutions may result in fire, electric shock or other hazards. 21. safety check - upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 22. heat - this product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. figure a example of antenna gr ounding as per na tional electrical code antenna lead wire antenna discharge uni t (nec section 810-20) gr ounding conduct ors (nec section 810-21) gr ound clamp gr ound clamp electri c ser vice equipment po wer ser vice gr ounding electr ode system (nec ar t 250, pa rt h) nec ? na tional electrical code s2898a before you start
4 en precautions (contd) before you start about copyright unauthorized copying, broadcasting, public performance and lending of discs are prohibited. this product incorporates copyright protection technology that is protected by u.s. patents and other intellectual property rights. use of this copyright protection technology must be authorized by macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by macrovision. reverse engineering or disassembly is prohibited. moisture condensation warning moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. do not use this unit at least for 2 hours until its inside gets dry. notice for progressive scan output consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. in case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the standard definition output. if there are questions regarding your tv set compatibility with this 525p dvd recorder, please contact our customer service center. installation location for safety and optimum performance of this unit: ? install the unit in a horizontal and stable position. do not place anything directly on top of the unit. do not place the unit directly on top of the tv. ? shield it from direct sunlight and keep it away from sources of intense heat. avoid dusty or humid places. avoid places with insufficient ventilation for proper heat dissipation. do not block the ventilation holes on the sides of the unit. avoid locations subject to strong vibration or strong magnetic fields. avoid the hazards of electrical shock and fire ? do not handle the power cord with wet hands. ? do not pull on the power cord when disconnecting it from ac wall outlet. grasp it by the plug. ? if, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our authorized service center for servicing. ? remote control (na471ud) with two aaa batteries ? rf cable (wpz0901cab01 or wpz0901tm002) ? audio/video cables (wpz0102tm015 or wpz0102lte01) ? owners manual (1vmn21952) ? quick guide (1vmn21953) owner's manual supplied accessory
5 en recording playing discs editing getting started changing the setup menu others espa?ol before you start connections precautions (contd) before you start manufactured under license from dolby laboratories. dolby and the double-d symbol are trademarks of dolby laboratories. servicing ? please refer to relevant topics on troubleshooting on pages 71-74 before returning the product. ? if this unit becomes inoperative, do not try to correct the problem by yourself. there are no user- serviceable parts inside. turn off, unplug the power plug and please call our help line mentioned on the front page to locate an authorized service center. cleaning the cabinet ? use a soft cloth slightly moistened with a mild detergent solution. do not use a solution containing alcohol, spirits, ammonia or abrasive. cleaning discs ? when a disc becomes dirty, clean it with a cleaning cloth. wipe the disc from the center to out. do not wipe in a circular motion. ? do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analogue records. cleaning the disc lens ? if this unit still does not perform properly although you refer to the relevant sections and to troubleshooting in this owners manual, the laser optical pickup unit may be dirty. consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit. disc handling ? handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. ? always store the disc in its protective case when it is not used. ir signal check if the remote control does not work properly, you can test if the remote control sends out the infrared signal with am radio or a digital camera (including built-in camera of cellular phone). it will help to define the cause of malfunction. ? with an am radio: tune a am radio to a band with no broadcasting. press a button on remote control toward the radio. sound will be fluttering when you press any key and the radio receives the signal. this means the remote control unit is working. ? with a digital camera (including built-in camera of cellular phone): direct a digital camera to remote control, press and hold a button on remote control. if infrared light appears through digital camera, the remote is working. maintenance dolby digital recording dolby ? digital recording enables consumers to record high-quality video with stereo sound on recordable dvd discs. the technology, when utilized instead of pcm recording, also saves record - able disc space, allowing for higher video resolution or extended recording time on each dvd. dvds created using dolby digital recording will play back on all dvd-video players. note: this is true when the players are compatible with actual recordable dvd discs.
6 en table of contents before you start playing discs using the title menu . . . . . . . . . . . 4 1 pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1 special playback . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 resume play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 fast forward / fast reverse . . . . . . . . . . . . . . . . . 4 2 skipping tv commercials during play . . . . . . . . . 4 2 rapid play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 step by step playback . . . . . . . . . . . . . . . . . . . . . 4 3 slow forward / slow reverse play . . . . . . . . . . . . 4 3 zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 marker setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 4 search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 5 title/chapter search . . . . . . . . . . . . . . . . . . . . . . 4 5 track search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6 time search . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6 repeat/random/program playback . . . . . . . . . . 4 7 repeat playback . . . . . . . . . . . . . . . . . . . . . . . . . 4 7 random playback . . . . . . . . . . . . . . . . . . . . . . . . 4 7 program playback . . . . . . . . . . . . . . . . . . . . . . . . 4 8 selecting the format of audio and video . . . . . . 4 8 switching subtitles . . . . . . . . . . . . . . . . . . . . . . . 4 8 switching audio soundtrack . . . . . . . . . . . . . . . . 4 9 switching virtual surround system . . . . . . . . . . . 4 9 switching camera angles . . . . . . . . . . . . . . . . . . 5 0 reducing block noise . . . . . . . . . . . . . . . . . . . . . 5 0 editing . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1 information on disc editing . . . . . . . . . . . . . . . . . 5 1 guide to a title list . . . . . . . . . . . . . . . . . . . . . . . . 5 1 editing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1 editing discs (setup menu) . . . . . . . . . . . . . . . . . 5 1 editing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 deleting titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 putting names on titles . . . . . . . . . . . . . . . . . . . . 5 3 setting chapter marks . . . . . . . . . . . . . . . . . . . . . 5 4 clearing chapter marks . . . . . . . . . . . . . . . . . . . . 5 4 hiding chapters . . . . . . . . . . . . . . . . . . . . . . . . . . 5 6 setting pictures for thumbnails . . . . . . . . . . . . . . 5 7 dividing a title . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 8 editing discs (setup menu) . . . . . . . . . . . . . . . . . 5 9 putting name on disc . . . . . . . . . . . . . . . . . . . . . 5 9 setting or releasing disc protect . . . . . . . . . . . . . 6 0 erasing disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 making edits compatible . . . . . . . . . . . . . . . . . . . 6 2 changing the setup menu . . . . . . . . . . 6 3 tour of the setup menu . . . . . . . . . . . . . . . . . . . . 6 3 language setting . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 display setting . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 audio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 video setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 8 settings for parental lock level . . . . . . . . . . . . . . 6 9 settings for pbc (playback control) . . . . . . . . . 7 0 others . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1 troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . 7 1 language code . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 4 glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 5 frequently asked questions . . . . . . . . . . . . . . . . 7 5 specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6 espa?ol . . . . . . . . . . . . . . . . . . . . . . . . . 7 7 limited warranty . . . . . . . . . back cover before you start . . . . . . . . . . . . . . . . . . . 2 precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . 6 features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 symbol in this owners manual . . . . . . . . . . . . . . 7 functional overview . . . . . . . . . . . . . . . . . . . . . . . . 8 installing batteries in the remote control . . . . . . . 1 1 using a remote control . . . . . . . . . . . . . . . . . . . . 1 1 display menu . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 setup menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 connections . . . . . . . . . . . . . . . . . . . . . 1 3 connection to a tv . . . . . . . . . . . . . . . . . . . . . . . 1 3 connection to a cable box or satellite box . . . . 1 4 connection to an audio system . . . . . . . . . . . . . 1 5 getting started . . . . . . . . . . . . . . . . . . . 1 6 easy dvd recording . . . . . . . . . . . . . . . . . . . . . . . 1 6 initial setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 channel setting . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 getting channels automatically . . . . . . . . . . . . . . 1 8 adding/deleting channels . . . . . . . . . . . . . . . . . . 1 9 selecting the tv stereo or sap . . . . . . . . . . . . . 2 0 setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 auto clock setting . . . . . . . . . . . . . . . . . . . . . . . 2 1 manual clock setting . . . . . . . . . . . . . . . . . . . . . 2 2 setting the daylight saving time . . . . . . . . . . . . 2 3 selecting the tv aspect ratio . . . . . . . . . . . . . . . 2 3 recording . . . . . . . . . . . . . . . . . . . . . . . 2 4 information on dvd recording . . . . . . . . . . . . . . 2 4 information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 recordable disc . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 recording mode . . . . . . . . . . . . . . . . . . . . . . . . . 2 4 making discs playable in other dvd player (finalize/make edits compatible) . . . . . . . . . . . . 2 5 before recording . . . . . . . . . . . . . . . . . . . . . . . . . 2 6 replacing disc menu . . . . . . . . . . . . . . . . . . . . . . 2 6 setting for auto chapter . . . . . . . . . . . . . . . . . . . 2 6 basic recording . . . . . . . . . . . . . . . . . . . . . . . . . . 2 7 one-touch timer recording . . . . . . . . . . . . . . . . 2 8 timer recording . . . . . . . . . . . . . . . . . . . . . . . . . . 2 9 hints for timer recording . . . . . . . . . . . . . . . . . . 3 1 overwriting an existing title . . . . . . . . . . . . . . . . 3 2 overwriting from the beginning of the title . . . . . 3 2 overwriting in the middle of the title . . . . . . . . . . 3 2 hints for overwriting . . . . . . . . . . . . . . . . . . . . . . 3 3 settings for an external source . . . . . . . . . . . . . 3 4 connection to an external source . . . . . . . . . . . . 3 4 recording from an external source . . . . . . . . . . . 3 5 setting a disc to protect . . . . . . . . . . . . . . . . . . . 3 5 playing the discs in other dvd players . . . . . . . 3 6 finalizing a disc . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 auto finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 7 playing discs . . . . . . . . . . . . . . . . . . . . 3 8 information on dvd play . . . . . . . . . . . . . . . . . . . 3 8 guide to displays . . . . . . . . . . . . . . . . . . . . . . . . 3 8 basic playback . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 9 playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 9 playing mp3 disc . . . . . . . . . . . . . . . . . . . . . . . . 4 0 playing discs using the disc menu . . . . . . . . . . . 4 1
7 en recording playing discs editing getting started changing the setup menu others espa?ol before you start connections before you start recording this unit is compatible with dvd+rw/dvd-rw, which is rewritable repeatedly and dvd+r/dvd- r, which is available for recording once. you can choose either one for your convenience. even if you choose dvd-rw/dvd-r discs, these discs are for - matted with dvd+vr mode. up to 8 program recording: you can program the unit to record up to 8 pro - grams, with in a month in advance. daily or weekly program recordings are also available. one-touch timer recording: you can easily set a recording time as you prefer. every time [record i ] or [rec i ] is pressed dur - ing recording, the recording time will be increased by 30 minutes up to 8 hours. the recording automatical - ly stops when the recording time you set is reached. automatic chapter mark setting: chapter marks will be put on recordings as you set in the setup menu before attempting to record. automatic title list making: the unit makes title list with the index automatically. left channel stereo recording: this unit can record the sound of the left channel monaural input as left and right channels automati - cally (the input from the ext2 only). play theater surround sound in your home: when connecting the unit to an amplifier or a decoder which is compatible with dolby digital, you are allowed to experience the theater surround sound from discs with surround sound system. quick search for what you want to watch: you can easily find the part you want to watch using the search function. search for a desired point on a disc by title, chapter or time. virtual surround system: you can enjoy stereophonic space through your exciting 2 channel stereo system. playing back on mp3 disc: you can enjoy mp3 files which are recorded on cd-r/rw. editing deleting titles: you can delete titles which you do not need anymore. putting names on titles: you can put your favorite names on titles. setting / clearing chapter marks you can set / clear chapter marks on titles. hiding unwanted chapters: to keep others from playing back some chapters without permission, you can hide chapters. setting pictures for thumbnails: you can change pictures for thumbnails. dividing titles (dvd+rw/dvd-rw only): you can divide a title into two or more. putting name on disc: you can put your favorite disc name. compatibility available for playing discs on a regular dvd player: recorded discs can be played on regular dvd players, including computer dvd drives compatible with dvd-video playback. you will need to finalize the discs recorded on dvd+r/dvd-rw/dvd-r discs to play in other dvd players. others progressive scan system unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals. this dvd unit not only plays dvds and cds but also offers features for you to record to dvd discs and edit them after that. the following features are offered with this unit. symbol in this owners manual to specify for what disc type each function is, we put the following symbols at the beginning of each item to operate. *dvd-rw (vr mode) disc is not played in this unit. features symbol description dv d- v dv d- v dv d- r w dv d- rw video video cd video cd dv d- r dv d- r dv d- r w dv d- rw +vr dv d+ r dv d+ r dv d+ r w dv d+ rw dv d- r dv d- r video +vr cd cd mp3 mp3 av ailab le to dv d-video discs av ailab le to d vd+r w discs av ailab le to dv d+r discs dv d+ r dv d+ r av ailab le to dv d+r dl discs av ailab le to dv d- rw discs fo r matted with d vd+vr mode av ailab le to dv d-r discs fo r matted with d vd+vr mode av ailab le to d vd-r w discs (video mode , finaliz ed ) av ailab le to d vd-r discs (video mode , finaliz ed ) av ailab le to au dio cd s av ailab le to cd-r/r w discs with mp3 files av ailab le to video cds dl
8 en functional overview before you start front panel 1. disc tray place a disc when opening the disc tray. 2. open/close a butto n* press to open or close the disc tray. 3. play b button press to start or resume play. 4. record i button press once to start a recording. press repeatedly to start a one-touch timer recording. 5. prev h button during playback, press to return to the beginning of the current chapter or track. during playback, press and hold for 1.5 seconds to fast reverse. or when playback is paused, press to play reverse step by step. when playback is paused, press and hold for 1.5 seconds to play slow reverse. 6. stop c button press to stop playback or recording. 7. next g button during playback, press to skip to the next chap - ter or track. during playback, press and hold for 1.5 seconds to fast forward. or when playback is paused, press to play for - ward step by step. when playback is paused, press and hold for 1.5 seconds to play slow forward. 8. standby-on button press to turn the unit on and off. if timer programmings have been set, press to set the unit in timer-standby mode. 9. audio input jacks ( ext2 ) use to connect external equipment with a stand - ard audio cable. 10. video input jack ( ext2 ) use to connect external equipment with a stand - ard video cable. 11. s-video input jack ( ext2 ) use to connect the s-video output of external equipment with an s-video cable. 12. remote control sensor receive signals from your remote control so that you can control the unit from a distance. 5 6 11 10 9 7 8 12 1 2 * 3 4 front panel indicator guide 1 2 3 1. power indicator light on when power is on. 2. record indicator light on when recording function works. 3. timer rec indicator light on when timer programming is set. light on during one-touch timer recording. flash when all timer programmings have been finished, or when a program cannot be performed by some reason. * the unit can also be turned on by pressing this button.
9 en recording playing discs editing getting started changing the setup menu others espa?ol before you start connections rear panel antenna au dio in video in l r au dio out video out (e1) in in out out s-video component video output l y p b /c b p r /c r r digit al a udio output pcm / bitstream co axial 1 2 3 4 5 6 7 8 9 10 11 1. antenna in jack use to connect an antenna. 2. video in jack ( ext1 ) use to connect external equipment with a stand - ard video cable. 3. video out jack use to connect a tv monitor, av receiver or other equipment with a standard video cable. 4. ac power cord connect to a standard ac outlet to supply power to this unit. 5. coaxial digital audio output jack use to connect an av receiver, dolby digital decoder or other equipment with a coaxial digital input jack with a digital coaxial cable. 6. audio out jacks use to connect a tv monitor, av receiver or other equipment with a standard audio cable. 7. component video output jacks use to connect a tv monitor with component video inputs with a component video cable. 8. s-video out jack use to connect the s-video input of a tv moni - tor, av receiver or other equipment with an s- video cable. 9. s-video in jack (ext1) use to connect the s-video output of external equipment with an s-video cable. 10. audio in jacks ( ext1 ) use to connect external equipment with a stand - ard audio cable. 11. antenna out jack use to connect an antenna cable to pass the sig - nal from the tv antenna in to your tv moni - tor. note ? do not touch the inner pins of the jacks on the rear panel. electrostatic discharge may cause permanent damage to the unit. ? this unit does not have the rf modulator. functional overview (contd) before you start
10 en 13. rec i button press once to start a record - ing. press repeatedly to start a one-touch timer recording. 14. rapid play button during playback, press to playback in a slightly faster/ slower mode with keeping the audio quality. 15. display button press to display the display menu on or off. 16. open/close a button* press to open or close the disc tray. 17. cm skip button during playback, press to skip 30 seconds. 18. next g button during playback, press to skip to the next chapter or track. or when playback is paused, press to play forward step by step. 19. fwd d button during playback, press to play fast forward. or when playback is paused, press to play slow forward. 20. pause f button press to pause play or record - ing. 21. title button press to display the title list. 22. setup button press to display the setup menu. during dvd playback, press and hold for more than 3 sec - onds to switch the progres - sive scanning mode to the interlace mode. 23. timer prog. button press to display the timer programming list. 24. channel - / + buttons press to change the channel up and down. 9 1 17 18 16* 20 22 21 24 23 3 4 5 11 12 10 2 6 7 8 19 13 15 14 ( * ) the unit can also be turned on by press - ing this button. functional overview (contd) before you start remote control 5. rev e button during playback, press to fast reverse. or when playback is paused, press to play slow reverse. 6. play b button press to start or resume play. 7. stop c button press to stop playback or recording. press to exit from the title list. 8. return button press to return to the previ - ously displayed menu screen. 9. ok button press to confirm or select menu items. 10. cursor k / l / { / b buttons press to select items or settings. 11. disc menu button press to display the disc menu. 12. rec mode button press to switch the recording mode. 1. standby-on button press to turn the unit on and off. if timer programmings have been set, press to set the unit in timer-standby mode. 2. number/character buttons press to select channel numbers. press to select a title/chapter/ track on display. press to enter values for the settings in the setup menu. or press to enter title names. 3. clear button press to clear the password once entered or to cancel the programming for cd or to clear the selecting marker number in the edit menu or to clear the program once entered in the timer programming list, etc. 4. prev h button during playback, press to return to the beginning of the current chapter or track. or when play - back is paused, press to play reverse step by step.
11 en recording playing discs editing getting started changing the setup menu others espa?ol before you start connections functional overview (contd) before you start press [display] to call up the display menu. this menu will give you the information on the playing disc. some operations are available while disc is playing. 1. indicates a disc type and a format mode (format mode is displayed with dvd-r w /dvd-r (video mode) disc inserted). note: in some descriptions on this manual, only one disc type is indicated as an example. 2. indicates a channel number. 3. indicates a recording mode and possible recording time left. 4. indicates a title number, chapter number and the time lapse of disc play. 5. each icon means: 6. indicates current disc status. using a remote control keep in mind the following when using the remote control: ? make sure that there is no obstacle between the remote control and the remote sensor on the unit. ? remote operation may become unreliable if strong sunlight or fluorescent light is shining on the remote sensor of the unit. ? remote control for different devices can interfere with each other. avoid using remote control for other equipment located close to the unit. ? replace the batteries when you notice a fall off in the operating range of the remote control. ? the maximum operable ranges from the unit are as follows. - line of sight : approx. 23 feet (7m) - either side of the center: approx. 16 feet (5m) within 30 - above: approx. 16 feet (5m) within 15 - below: approx. 10 feet (3m) within 30 installing batteries in the remote control install two aaa size batteries (supplied) matching the polarity indicated inside battery compartment of the remote control. note: incorrect use of batteries can result in hazards such as leakage and bursting. please observe the following: ? do not mix new and old batteries together. ? do not use different kinds of batteries together, although they may look similar, different batteries may have different voltages. ? make sure that the plus and minus ends of each battery match the indications in the battery compartment. ? remove batteries from equipment that is not going to be used for a month or more. ? when disposing of used batteries, please comply with governmental regulations or environmental public instructions rules that apply in your country or area. ? do not recharge, short-circuit, heat, burn or disassemble batteries. r e c / o t r r e c s p e e d o p e n / c l o s e c h a n n e l r e v f w d s t o p p l a y p o w e r s - v i d e o v i d e o a u d i o l r c l e a r c m s k ip s k i p r e c p a u s e p e n t e r m e n u p l a y l i s t t o p m e n u / o r ig in a l 1 2 3 4 5 6 7 s t a n d b y - o n o p e n / c l o s e 8 9 0 f w d s t o p p l a y r e v remote control 30 within about 23 f eet (7m) 30 2 1 3 guide to displays on screen menu this unit uses the following on screen menu for most operations: setup menu and title list, and display menu. they allow you to change the playing status of the disc during playback. the display menu also gives you information on the status of the disc. : search : a udio : subtitle : angle : repeat : ma rk er : noise reduction : zoom : surround display menu dv d+ rw 1 1 0:00:00 ch 2 1 4 5 2 5 2 6 hq(1hr) 1:01 3 3
12 en functional overview (contd) before you start setup menus press [setup] to display the setup menu. then using [ k / l ], select a menu and press [ok] to display the menu. these menus provide entries to all main functions of the unit. 1. required settings: to set up the required settings. 2. playback: to set up the unit to play discs as you prefer. 3. display: to set up the osd screen and the front display of the unit as you prefer. 4. recording: to set up the unit to record to discs as you prefer. 5. clock: to set up the clock of the unit as you need. 6. channel: to adjust the channel setting of the unit as you prefer. 7. disc edit / cd playback mode: disc edit is available only when a disc which is formatted with dvd+vr mode is inserted into the unit. when a dvd-video disc (commercially available), a blank disc, and dvd-r formatted with other than dvd+vr is inserted into the unit, you cannot select disc edit. cd playback mode is available only when an audio cd disc, a video cd or a cd-r/r w disc with mp3 files is inserted into the unit. 1. edit disc name: allows you to rename the disc formatted with dvd+vr. 2. disc protect : allows you to protect a disc from accidental editing or recording. 3. erase disc (dvd+rw/dvd- rw only) : allows you to erase all contents in the disc and format it. 4. make edits compatible (dvd+rw only): allows you to make edits possible to play discs in other units after editing titles. finalize (dvd+r/dvd-r/ dvd-r w only ): allows you to finalize a disc containing recorded titles. 5. random play: allows you to activate the random playback feature. 6. program play (audio cd/ video cd only): allows you to activate the programmed playback feature. 7. pbc (video cd only) allows you to select images or information on the menu screen by activating pbc (playback control) function. disc edit erase disc make edits compatible disc pr otect off on edit disc name 2 3 1 1 2 3 4 3 setup pla yba ck displ ay recor ding cloc k channel disc edi t required settings 1 2 3 4 5 6 7 1 2 3 4 5 6 7 cd pla yba ck mode pr ogram pl ay pbc (video cd onl y) on random pl ay 4 5 5 5 7 6 < cd playback mode menu > disc edit erase disc finaliz e disc pr otect off on edit disc name 2 3 1 1 2 3 4 3 disc edit finaliz e disc pr otect off on edit disc name 2 3 1 1 2 4
13 en recording playing discs editing before you start connections getting started changing the setup menu others espa?ol connections connection to a tv make one of the following connections, depending on the capabilities of your existing equipment. antenn a au dio in video in l r au dio out video out (e1) in in out out s-vide o componen t video output l y p b /c b p r /c r r co axial r l a udio out video out l r s-video in in ou t s-video p b /c b y p r /c r component video in component video output y p b /c b p r /c r audio out tv basic audio method 1 method 2 better picture best picture s-video out component video out audio cable (supplied) s-video cable (commercially available) component video cable (commercially available) this uni t antenna au dio in video in l r au dio out video out (e1) in in out out s-video component video output l y p b /c b p r /c r r digi ta l a udio output pcm / bitstrea m co axial au dio in vide o rf cab le (supplied) video cab le (supplied) au dio cab le (supplied) (bac k of tv) or cab le tv signal or cab le tv signal connect connect connect connect disconnect antenna antenna (bac k of this unit) (bac k of tv) 3 2 1 4 5 plug in the ac po wer cord of this unit. 6 note ? connect this unit directly to the tv. if the a/v cables are connected to a vcr, pictures may be distorted due to the copy protection system. ? when progressive scan mode is selected, no video signal will be output from the video out or s-video out jack. after you have completed connections ? switch the input selector on your tv to an appropriate external input channel (usually near channel 0). press a button on the tvs original remote control that selects an external input channel until the dvd recorders picture appears. check your tv owners manual for details. to set progressive scan mode, refer to page 68 ? this unit is compatible with the progressive scan system. the feature provides you with the higher definition images than the traditional output system does. to utilize this feature, you must set progressive scan mode to on. admira l cur tis mathis ge hitach i jvc k enw ood lxi-series magna vo x au x line1, line2, 00, 90, 91, 92, 93 input , tv/vcr, 00, 90, 91, 92, 93 inpu t, au x vide o, video1, video2, video3 au x 00 au x channe l input mode names f or common tv brands pa nasoni c rca samsung san yo sharp son y t oshib a zenith tv/video inpu t, tv/vcr, 00, 90, 91, 92, 93 tv/video video 00 video1, video2, video3 tv/gam e 00
14 en connection to a cable box or satellite box connections note to the cable tv system installer : this reminder is provided to call the cable tv system installers attention to article 820-40 of the national electrical code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible. with this setup: ? you can record any unscrambled channel by selecting the channel on the cable box or satellite box. be sure that the cable box or satellite box is turned on. ? you cannot record one channel while watching another channel. antenna au dio in video in l r au dio out video out (e1) in in out out s-video component video output l y p b /c b p r /c r r digi ta l a udio output pcm / bitstream co axial au dio in vide o rf cab le (supplied) video cab le (supplied) au dio cab le (supplied) (bac k of tv) cab le tv signal connect connect connect connect (bac k of this unit) 2 1 3 4 in o u t (cab le bo x or satellite bo x) (commercially av ailab le) rf cab le
15 en recording playing discs editing before you start connections getting started changing the setup menu others espa?ol connection to an audio system connections ? when you change the connections, all devices should be turned off. ? refer to the operation manual accompanying external devices for more information. au dio out video out l r stereo system co axial digit al a udio output pcm / bitstream co axial audio method 1 analog audio input jacks digital audio input jack audio out digital audio out method 2 audio cable (supplied) audio coaxial digital cable (commercially available) dolby digital decoder, md deck or dat deck this unit note ? the audio source on a disc in a dolby digital multi-channel surround format cannot be recorded as digital sound by an md or dat deck. ? by hooking this unit up to a multi-channel dolby digital decoder, you can enjoy high-quality dolby digital multi- channel surround sound as heard in the movie theaters. ? playing a dvd using incorrect settings may generate noise distortion and may also damage the speakers. if output is dolby digital encoded audio, connect to a dolby digital decoder. unless connected to a dolby digital decoder. connecting to an md deck or dat deck. - - - stream pcm pcm setup >playback >disc audio >digital out > pcm dolby digital setting connection * to complete these settings, refer to pages 66-67. note ? playing a dvd using incorrect settings may generate noise distortion and may also damage the speakers.
16 en easy dvd recording getting started the following will help you to understand easily how to record to dvd discs. note: make sure batteries are in the remote control and you have connected this unit with the tv correctly. step 1: choose a disc type. there are several types of recordable dvd discs to choose from. this unit can record on the following type of discs. for example, when you want to record repeatedly on the same disc, select the rewritable dvd+rw/dvd-rw type disc. when you want to save recordings without any alteration, a non-rewritable dvd+r/dvd-r can be your choice. step 3: insert a blank disc. to open to close 2 loading this operation may take a while to be recognized. 3 1 step 2: turn on the unit . remote control step 4: select the recording mode. hq (1hr) 0:58 formatting 90% dvd+rw/dvd-rw only select the input to which the unit is connected on your tv.
17 en recording playing discs editing before you start changing the setup menu others espa?ol connections getting started easy dvd recording (contd) getting started step 6: record on dvd disc. step 5: select the desired channel. step 7: stop the recording. ch 12 i writing to disc 90% hint 1: play the recorded contents you can select the title you want to play from a displayed title list, and immediately start to play. recorded contents are easily accessible, with simple procedure of choosing a title on in the menu screen. what are titles and chapters? the contents of the dvd disc are generally divided into titles. titles may be further divided into chapters. hint 2: edit the recorded disc you will find editing discs is easy. this unit offers convenient edit functions to discs formatted with dvd+vr mode. you can edit the following from a title list or setup menu. ? deleting titles ? putting names on titles ? setting / clearing chapter marks ? hiding chapters ? setting pictures for thumbnails ? dividing a title (dvd+rw/dvd-rw only) ? putting name on disc finalizing a disc ? this will allow dvd+r/dvd-rw/dvd-r discs recorded on this unit to be played back on a different dvd player without finalization it will not be playable on other units . ? after finalizing a disc, you cannot edit contents on that disc. ? dvd+rw discs is not required to finalize but to make edits compatible to play on other units after editing. you can edit the disc after make edits compatible . tr ac k 1 t rack 2 t rack 3 t rack 4 t rack 5 star t rec. stop/star t stop rec. star t rec. stop rec. title 1 title 2 chapter 1 chapter 1 chapter 2 chapter 3 chapter 2 this operation may take a while to be completed. 1 sp (2hr) 2 enpty titl e 1:41:17 sp (2hr) nov/21/06 11:0 0 am ch12 sp nov/21/06 0:20:44
18 en getting started 3 4 1 initial setting turn on this unit for the first time, you need to follow these steps. 1 press [standby-on ]. 2 turn the tv on. select the input to which the unit is connected. refer to the table on page 13. initial setup will automatically appear. 3 using [ k / l ], select your desired language on screen menu. then press [ ok ] to set language. channel preset will automatically appear. 4 press [ok] to start channel preset. the unit will start getting channels available in your area. after channel setting is finished, clock setting will appear. then press [ok]. 5 follow to step 3 in manual clock setting on page 22. ? if a public broadcasting station (pbs) is available in your area, follow auto clock setting on page 21. channel setting 2 using [ k / l ], select channel. press [ok]. channel menu will appear. 3 using [ k / l ], select auto channel preset. press [ok]. the unit will start getting channels available in your area. 4 press [setup] to exit. ? you can select only the channels memorized in this unit by using [channel - / + ] and the number buttons . tv / video *this bu tton can be labeled as input , au x , etc. tv's or igina l remote control a uto presetting no w ch 1 if you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. getting channels automatically 1 press [setup]. initial setup channel preset 2 3 1 4 initial setup fran?ai s espa?ol englis h initial setup cloc k settin g
19 en recording playing discs editing before you start changing the setup menu others espa?ol connections getting started note ? if the auto channel presetting is cancelled during presetting, some channels not yet preset may not be received. ? the selection will depend on how you receive the tv channels. to cancel the auto channel presetting during scanning: press [return] or [setup] to cancel. to select a channel you can select a channel by directly entering channel using the number buttons on the remote control. notes for using the number buttons: ? when selecting cable channels which are higher than 99, enter channel numbers as a three-digit number.(for example: 117, press [1], [1], [7] ) ? you must precede single-digit channel numbers with a zero (for example: 02, 03, 04 and so on). ? you can select the line input mode (e1 or e2). to select e1 by pressing [0], [0], [1] . to select e2 by pressing [0], [0], [2] . details are on page 35. channel setting (contd) getting started 4 select the channel number to add or delete. press [ { ] or [channel - ] to move to a lower channel number. press [ b ] or [channel + ] to move to a higher channel number. press the number buttons to select a channel number directly. 5 using [ k / l ], select add or delete. press [ok]. the channel number will be added or deleted from the channel memory. then the next channel number will appear so that you can continue adding or deleting channels. 6 press [setup] to exit. adding/deleting channels the channels you no longer receive or seldom watch can be deleted from the memory. you also may add channels into memory. 1 press [setup]. 2 using [ k / l ], select channel. press [ok]. channel menu will appear. 3 using [ k / l ], select manual channel preset. press [ok]. manual channel preset menu will appear. manual channel preset ch 2 ad d delete 1 2 3 4 5 6 4 manual channel preset ch 7 ad d delete note ? [channel - / + ] works on the memorized channel in this unit. ? [ { / b ] works on all of channel numbers. 4
20 en selecting the tv stereo or sap getting started you can select a sound channel to output from tv. stereo has been selected as the default. 1 press [setup]. 2 using [ k / l ], select required settings. press [ok]. required settings menu will appear. 3 using [ k / l ], select tv audio select. press [ok]. option window will appear. 4 using [ k / l ], select stereo or sap. press [ok]. stereo: outputs main-audio. sap (secondary audio program): outputs sub-audio. 5 press [setup] to exit. 1 2 3 4 5 notes on tv channel audio ? when you record a tv program available in second audio or stereo, you have to select either stereo or sap in the channel preset screen beforehand. refer to the following table to check an appropriate setting. ? you can only play the disc in second audio if a tv program is available in second audio and you set tv audio select to sap . tv a udio select sap stereo selected audio broadcast audio disc recording audio output stereo stereo+sap stereo stereo stereo stereo stereo mono+sap mono mono mono mono mono sap stereo+sap sap sap stereo stereo stereo mono+sap sap sap mono mono mono
21 en recording playing discs editing before you start changing the setup menu others espa?ol connections getting started setting the clock getting started set the clock before you try the timer programming. if a public broadcasting station (pbs) is available in your area, follow auto clock setting below. if not, follow manual clock setting on page 22. auto clock setting make sure ? the antenna/cable tv connections are correct. ? if this unit is connected to a cable box or satellite box, select the local pbs station on them to set the clock automatically. 1 press [setup]. 2 using [ k / l ], select clock. press [ok]. clock menu will appear. 3 using [ k / l ], select auto clock setting. press [ok]. option window will appear. 4 ? if you do not know your pbs channel number: using [ k / l ], select auto. press [ok]. the setting will be activated. ? if you know your pbs channel number: using [ k / l ], select manual. press [ok]. using the number buttons or [ k / l ], enter your pbs channel number. press [ok]. the setting will be activated. ? if you want to set the clock manually and cancel the auto clock setting function: using [ k / l ], select off in auto clock setting . press [ok]. the auto clock setting function will be canceled. 5 press [setup] to exit. 6 press [standby-on ] to turn off the unit. this unit will search for the time only when the power is off. leave it off for several minutes to give this unit time to set the clock. note ? the clock may set itself automatically after you connect the antenna/cable signal to this unit and plug in the power cord. 2 3 4 6 1 5 au to cloc k setting off manual au to au to cloc k setting - manual ch 1 set channel no.
22 en getting started manual clock setting 1 press [setup]. 2 using [ k / l ], select clock. press [ok]. 3 using [ k / l ], select clock setting. press [ok]. clock setting menu will appear. cloc k setting ---- / -- / ---- ( ---- ) -- : -- -- press [ok] again. default date will appear. 4 using [ k / l ], enter the date (month / day / year). press [ { / b ] to move the cursor. cloc k setting j an / 01 / 2006 ( sun ) 12: 00 am 5 using [ k / l ], enter the time (hour / minute). press [ { / b ]. a cursor will move to am. cloc k setting j an/ 01 / 2006 ( sun ) 12: 00 am 6 press [ k / l ] to select am or pm. press [ok]. clock menu will appear, then the settings will be activated. although seconds are not dis - played, they begin counting from zero. 7 press [setup] to exit, if clock menu appears. note ? your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually. 1 2 3 4 5 7 setting the clock (contd) 6
23 en recording playing discs editing before you start changing the setup menu others espa?ol connections getting started getting started setting the clock (contd) 3 using [ k / l ], select daylight saving time. press [ok]. option window will appear. da ylight sa ving time off on 4 using [ k / l ], select on or off. press [ok]. select on when currently utilizing the daylight saving time. 5 press [setup] to exit. you can select the tv aspect ratio to match the formats of what you are playing with the unit and your tv screen (4:3 standard or 16:9 widescreen tv). 4:3 letter box has been selected as the default. 1 press [setup]. 2 using [ k / l ], select required settings. press [ok]. required settings menu will appear. 3 using [ k / l ], select tv aspect. press [ok]. option window will appear. 4:3 letter bo x 4:3 p an & scan 16:9 wide tv aspect refer to the note on this page. 4 using [ k / l ], select a desired option. press [ok]. 5 press [setup] to exit. note if you have a standard tv: select 4:3 letter box, so that black bars appear on the top and bottom of the screen when playing wide-screen picture and all that . select 4:3 pan & scan for a full height picture with both sides trimmed when playing wide-screen picture and all that. if you have a widescreen tv: select 16:9 wide. 1 2 3 4 5 1 5 selecting the tv aspect ratio setting the daylight saving time when daylight saving time is on, the unit clock will automati - cally move forward one hour on the first sunday in april and move back one hour on the last sunday in october. on has been selected as the default. 1 press [setup]. 2 using [ k / l ], select clock. press [ok]. clock menu will appear. 2 3 4
24 en recording information this unit can record to dvd+rw, dvd-rw, dvd+r and dvd-r discs. dvd+r/dvd-r discs can only be recorded to once. dvd+rw/dvd-rw discs can be recorded to and erased many times. these discs are formatted with dvd+vr mode automatically. discs other than dvd+vr mode cannot be recorded in this unit. logo attrib utes 8cm/12cm, single-sided, single la y er disc appro x. max. recording time (slp mode): 360 minutes (4.7gb) (f or 12cm) 108 minutes (1.4gb) (f or 8cm) d vd+r w d vd+r 8cm/12cm, single-sided, single la y er disc appro x. max. recording time (slp mode): 360 minutes (4.7gb) (f or 12cm) 108 minutes (1.4gb) (f or 8cm) d vd-r w d vd-r recordable disc ? dvd+r 1x-16x, dvd+rw 1x-4x, dvd-r 8x/16x, and dvd-rw 4x discs can be used in this recorder. ? we strongly recommend for good recording quality: tdk dvd+r 4x/8x/16x, sony dvd+r 4x/8x/16x, maxell dvd+r 4x/8x/16x, sony dvd+rw 4x, maxell dvd-r 8x/16x, maxell dvd-rw 4x ? discs that have been tested and are proven to be compatible with this recorder: verbatim dvd+r 8x verbatim dvd+rw 4x verbatim dvd-r 8x verbatim dvd-rw 2x maxell dvd-r 16x jvc dvd-rw 4x ? you can play dvd+rw in most dvd players without finalizing. to play discs other than dvd+rw in other dvd players, you will need to finalize. recording mode you can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows. recor ding mode recor ding time video/sound quality disc siz e 8cm disc 60 min 120 min 150 min 180 min 240 min 360 min 12cm disc (poor) (poor) (good) (good) hq (1hr) sp (2hr) spp (2.5hr) lp (3hr) ep (4hr) slp (6hr) 18 min 36 min 45 min 54 min 72 min 108 min hq (1hr) sp (2hr) spp (2.5hr) lp (3hr) ep (4hr) slp (6hr) ? the recording time are estimates and actual recording time may differ. ? the audio and video quality is getting poorer as the recording time becomes longer. ? each time [rec mode] is pressed, recording mode and its allowed recording time will be displayed. note ? this recorder cannot record cd-r or cd-rw discs. ? dvd+r/rw, dvd-r/rw and cd-r/rw discs recorded on a personal computer or a dvd or cd recorder may not play if the disc is damaged or dirty or if there is dirt of condensation on the players lens. ? if you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (check with the software publisher for more detailed information.) ? dvd-r/rw discs recorded in video mode cannot be recorded additionally using the unit. ? since the recording is made by the variable bit rate (vbr) method, depending on the picture you are recording, the actual remaining time for recording may be a little shorter than the remaining time displayed on the osd. ? you cannot record copy-protected video using this unit. (copy-protected video includes dvd- video discs and some satellite broadcasts.) ? you cannot record videos that includes copy- once only signal. information on dvd recording
25 en playing discs editing before you start changing the setup menu others espa?ol connections recording getting started recording making discs playable in other dvd player (finalize/make edits compatible) after recording on dvd+r / dvd-r/dvd-r w , you must finalize the disc in order to play on other units. (refer to page 36.) there is no need to finalize dvd+rw discs but to make edits compatible (refer to page 62) for playing on other units after editing. this unit d vd pla ye r not pla ya bl e pla ya bl e d vd-r/d vd-r w d vd+r d vd+r w not finaliz ed not perf or ming ma ke edits compatib le after editing titles d????????h d????????h k??>c????>a????????h k??>c????>a????????h hw??>?????>???????>??>k??>c????>a????????>??>?????>btb>???? ????? l editing titles ? once dvd+r/dvd-r/dvd-rw discs are finalized, you cannot record additionally or edit. ? you cannot record additionally or edit on finalized dvd-rw discs unless the dvd-rw discs are performed undo finalize. information on dvd recording (contd)
26 en recording before recording it can be used to prohibit recording additionally or to replace the title list after recording when inserting the disc includes titles and a different type of title list recorded by other units. off has been selected as the default. 1 press [setup]. 2 using [ k / l ], select recording. press [ok]. recording menu will appear. 3 using [ k / l ], select replace disc menu. press [ok]. replacing disc menu 1 dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r setting for auto chapter 5 1 2 3 4 5 2 3 4 note ? the interval for auto chapter marks may slightly deviate from the one you specified on the auto chapter screen. ? a blank chapter may be created depending on the remaining time of the disc. au to chapter 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes off you can set a specified time for chapter marks. 1 press [setup]. 2 using [ k / l ], select recording. press [ok]. 3 using [ k / l ], select auto chapter. press [ok]. option window will appear. 4 using [ k / l ], select a desired time option. press [ok]. 5 press [setup] to exit. option window will appear. 4 using [ k / l ], select on or off . press [ok]. on: replacing the title list off: prohibiting additional record 5 press [setup] to exit. dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r replace disc men u off on
27 en playing discs editing before you start changing the setup menu others espa?ol connections recording getting started recording note ? recording starts immediately and continues until the disc is full or you stop recording. ? when the unit clock has not been set, the space for a date and time of title names will be blank. ? when you record a tv program which has stereo and sap audio, you have to select the tv channel audio (stereo or sap) beforehand. only the selected channel audio will be recorded. refer to selecting the tv stereo or sap on page 20 for more details. ? you cannot change the recording mode during the rec pause mode. ? you can change a channel during the rec pause mode. follow the steps below to record tv programs. 1 press [standby-on ]. turn the tv on and be sure to select the input to which the unit is connected. 2 press [open/close a ]. the disc tray will open. 3 insert your disc with its label facing up. align the disc to the disc tray guide. 4 press [open/close a ] to close the disc tray. ? when inserting a brand-new dvd+rw/dvd-rw disc, the unit automatically starts to format. ? if titles have been recorded on the disc, the title list is displayed. press [stop c ] to exit the title list. 5 using [rec mode], select a recording mode. refer to recording mode on page 24. 6 using [channel - / + ] or the number buttons, select a desired channel to record. 7 6 7 8 ch 12 hq (1hr) 0:58 i this operation may take a while to be completed. basic recording 1 6 5 dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r 7 press [rec i ] to start record - ing. i mark will be displayed for 5 seconds. press [pause f ] to pause recording. press [pause f ] or [rec i ] again to restart recording. 8 press [stop c ] to stop record - ing. the recorded title will be on the displayed title list. (refer to guide to a title list on page 51.) ? press [stop c ] to exit the title list. disc tr ay guide 2 4 writing to disc 90% 1 sp (2hr) 2 enpty titl e 1:41:17 sp (2hr) nov/21/06 11:0 0 am ch12 sp nov/21/06 0:20:44
28 en recording note ? press [display] to see the remaining recording time on the tv screen during a one- touch timer recording . ? you cannot pause a one- touch timer recording. ? unlike a timer recording, you can perform the following operations during a one-touch timer recording. -turning the power off. -using [rec i ] and [stop c ] . ? the unit will be turned off automatically under the following conditions. 1) no space remained on the disc. 2) when a power failure occurs. this is a simple way to set the recording time in blocks of 30 minutes. check that the disc you are recording onto has enough space for the time you set. when the recording finishes the recorder automatically goes into standby mode. 1 turn on the unit and load a recordable disc. make sure that the tv input is set on the unit. 2 using [rec mode], select a recording mode. refer to recording mode on page 24. 3 using [channel - / + ] or the number buttons, select a desired channel to record. 4 press [rec i ] repeatedly to select desired recording time. recording times appear on the tv screen (30 minutes to 8 hours). recording will start. when the unit reaches the specified time, it will be turned off automatically. to change the recording length during the one-touch timer recording, press [rec i ] repeatedly until the desired length appear. to cancel the one-touch timer recording within the specified time, press [stop c ] . 3 4 this operation may take a while to be recognized. 0:30 (normal recor ding) 8:00 7:30 1:00 i 0:30 this operation may take a while to be completed. one-touch timer recording 4 3 2 dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r 1 1
29 en playing discs editing before you start changing the setup menu others espa?ol connections recording getting started recording you can program the unit to record up to 8 programs within a month in advance. daily or weekly program recordings are also available. ? be sure to set the clock before setting a timer programming. ? insert a recordable disc. 1 press [timer prog.]. timer programming list will appear. 2 using [ k / l ], select a program number. press [ok]. 3 using [ k / l ], enter the date. press [ b ]. 4 using [ k / l ], enter the start and end time. press [ b ]. 5 using [ k / l ], select the ch number to record. press [ b ]. to record from external input, select e1 or e2. 6 using [ k / l ], select a recording mode. refer to recording mode on page 24. when auto is selected as a recording mode, the unit determines how much time is available on the disc and record in the appropriate recording mode to complete recording the program. note ? if you have not set the clock yet: a manual clock setting menu will appear instead of the timer programming list at step 1. continue with the step 3 in manual clock setting on page 22 before setting a timer programming. ? press [ s / b ] to move the cursor to the left and the right in the timer programming menu. ? after step 8, the recording will start immediately after the recording time you set. 1 2 3 4 5 6 timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 12:57am --:-- e1 date start end ch mode timer pr ogramming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 --:-- --:-- e1 date start end ch mode timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. --- date start end ch mode when pressing [ l ] at the current date, the date will change as follows. dail y mon-sa t ja n/01 ja n/31 mon-fri sa t fri sun timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 12:57am 1:57am ch 8 a uto date start end ch mode timer recording e.g. january 1st 7 press [ok] when all items are entered. your program setting will be stored. ? to set another program, repeat steps 2 to 7. ? to exit, press [timer prog.] or [setup]. ? when two or more programs are overlapped, overlap and the overlapped program number will appear. 8 press [standby-on ] to set a timer programming. timer rec indicator will be on. 7 7 8 timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 12:57am 1:57am ch 8 date start end ch mode timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. ja n/01 12:57am 1:57am ch 8 hq date start end ch mode dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r
30 en checking, canceling, or correcting the timer programming information recording 1 press [standby-on ] . timer rec indicator will be off. 2 press [timer prog.]. timer programming list will appear. 3 check the information on the list you will need. 4 to clear the timer programming: using [ k / l ], select the program. press [clear]. to correct the timer program - ming: using [ k / l ], select your desired program. press [ok]. next, correct the timer programming by using [ k / l / { / b ] . finally, press [ok] again. 5 press [timer prog.] to exit. 6 press [standby-on ] to return to the timer standby mode. note ? press [timer prog.] to check the timer programming in process. when the timer recording is proceeding, that program will be highlighted with red. in this case, you cannot select any other program. 2 5 6 4 1 press [clear] to erase the selected program. each error number means: timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- 1. j an/01 12:57am 1:57am ch 8 hq date start end ch mode to stop the timer recording in process press [stop c ] on the front panel of the unit. [stop c ] on the remote control is not effective. if the timer program did not complete correctly, the error number appears in the timer programming list. timer programming 2. --- 3. --- 4. --- 5. --- 6. --- 7. --- 8. --- * j an/01 12:57am 1:57am ch 8 e22 date start end ch mode ? a program with the error number is grayed and asterisked in the timer programming list. ? once the timer programming list with error line(s) is displayed, or after canceling and setting again the timer standby mode, the program line(s) with error will be cleared. timer recording (contd) e1-22 e37-39 recording error other than below e41 power failed e23-24 unrecordable disc e42 no disc when recording e25-26 copy prohibited program e29 disc protected e43 already 49 titles recorded e30 disc full e44 already 254 chapters recorded e34 no space for control information e35 pca full e45 copy prohibited program e36 already finalized video format disc e46 it is impossible to record additionally on a disc recorded by other units when setting replace disc menu to off. e40 some portion has not been recorded because of program overlapping. recording did not start at the start time. ? e27,e28,e31,e32 and e33 are not displayed.
31 en playing discs editing before you start changing the setup menu others espa?ol connections recording getting started recording hints for timer recording note for dvd recording pr og. a pr og. b actual recor ding the first 30 seconds (at the longest) will be cut off . pr og. b pr og. a when the end time of the pr ogramming currentl y being recor ded and the star t tim e of the subsequent pr ogram are same: if pr og. a is a dv d recording program, the beginning of the pr og. b ma y be cut off . ? when the recording time of two programs are overlapped, or the end time of a program and the start time of another program is the same, the first 30 seconds (at the longest) of the subsequent program will be cut off. ? if the cut-off portion comes up to one minute or more, this program will be displayed with error number e40 in the timer programming list. the priority of overlapped settings pr og. a pr og. b actual recor ding pr og. a pr og. b a pr ogramming set pre viousl y has priority when the star ting time is the same: a program set pre viously (pr og. a) has pr ior ity . the first 30 seconds (at the longest) will be cut off . pr og. a pr og. b actual recor ding pr og. a pr og. b pr og. c when some pr ogramming ha ve been made at the end time of the pr ogramming currentl y being recor ded: a program set pre viously (pr og. b) has pr ior ity . the first 30 seconds (at the longest) will be cut off . pr og. a pr og. b actual recor ding pr og.b pr og.a when the recor ding time is par tiall y o verlapped: pr og. a will star t after pr og. b is complete to be recorded. the first 30 seconds (at the longest) will be cut off . pr og. a pr og. b actual recor ding pr og. b when the recor ding time is entire ly ov erlapped: pr og.a will not be recorded. ? if there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. ? if a disc is not on the tray, timer rec indicator flashes and timer recording cannot be performed. in some cases, timer rec indicator will be on momentarily around the start point as the unit attempts to record. please insert a recordable disc. ? when all the timer recording is completed, timer rec indicator flashes. to play or eject the recorded disc, press [standby-on ] first, then select the recorded title and press [play b ] or [open/close a ] . ? during timer recording or timer standby mode ( timer rec indicator will be on), any operations on the unit will not be available. to make these operations available, cancel the timer recording or timer standby mode first ( timer rec indicator will be off). ? to cancel the timer standby mode, press [standby-on ] . ? when the start and the end time are the same, the length of the recording will be set for 24 hours. when the disc reaches at the end during the recording, the unit turns itself off. ? when the programmed start and end time are earlier than the current time, the setting will not be accepted and be cleared for redoing. ? if the start time is earlier and the end time is later than the current time, the recording will start right after you turn the power off. this unit records the programs according to priority if the timer programmings are overlapped. the timer programming set previously has priority. a timer recording of lower priority will be canceled, start from the middle or stop on the way. check the overlapped timer programmings and change the priority if necessary. timer recording (contd)
32 en recording dv d+ r w dv d+ rw dv d- r w dv d- rw +v r you can overwrite the existing title from the beginning. 1 turn on the unit. make sure that the tv input is set on the unit. 2 load the disc that includes a title to be overwritten. title list will appear. if the title list does not appear, press [disc menu] . 3 using [rec mode], select a recording mode. refer to recording mode on page 24. 4 using [ k / l ], select a title to be overwritten. press [ok]. 5 using [ k / l ], select overwrite. press [ok] . channel can be changed. i sp(2hr) 2:00 ch 12 d vd+r w 1 1 0:00:00 selected title number to be ov erwr itten 6 press [rec i ]. overwriting recording starts. the elapsed-time counter starts running. 7 press [stop c ] to stop recording. title name is also overwritten. 2 4 5 6 7 overwriting an existing title 1 this operation may take a while to be recognized. overwriting from the beginning of the title dv d+ r w dv d+ rw dv d- r w dv d- rw +v r you can overwrite the existing title from the selected position. 1 proceed to steps 1 to 2 above. 2 using [ k / l ], select a title to be overwritten. press [ok]. 3 using [ k / l ], select play. press [ok]. playback will start. 4 press [pause f ] at the point from which you want to start overwriting. 5 press [rec i ]. f i mark, display menu, ch, and the time lapse will be displayed as stated above. channel can be changed. 6 press [rec i ] again. overwriting recording starts. 7 press [stop c ] to stop recording. title name is not overwritten. overwriting in the middle of the title 2 4 5 6 7 note ? recording mode of the overwriting title is the same as that of the original (overwritten) title when overwriting in the middle of the title. 1 sp (2hr) 2 3 nov/21/06 11:0 0 am ch12 sp nov/21/06 0:20:44 nov/22/06 11:3 5 am ch13 ep nov/22/06 0:10:33 empty title 3:15:44 ep(4hr) e d i t o v e r w r i t e p l a y this operation may take a while to be recognized. this operation may take a while to be recognized. 3 1 sp (2hr) 2 3 nov/21/06 11:0 0 am ch12 sp nov/21/06 0:20:44 nov/22/06 11:3 5 am ch13 ep nov/22/06 0:10:33 empty title 1:37:52 sp(2hr ) note ? remaining time, which is displayed on the bottom right corner of the screen during overwriting, indicates the remaining time at the time of starting overwriting. 2 3
33 en playing discs editing before you start changing the setup menu others espa?ol connections recording getting started note ? when a title name is overwritten, its thumbnail is also overwritten. ? when existing title is longer than the overwriting title, overwriting title is divided into 2 titles. if this is the case, there may be an unrecorded portion between titles. ? a chapter mark is put between titles when overwriting in the middle of the title. ? auto chapter interval time is reset at the overwriting start point. recording overwriting an existing title (contd) hints for overwriting overwriting title (a) existing title (b) after o verwriting pr og. a when o verwriting title is sho rt er than the e xisting title: (ov erwr iting from the beginning of the title) title name: a title name: b title name: a title name: b 30 - 180 seconds will be cut off . overwriting title (a) existing title (b) after o verwriting pr og. a when o verwriting title is longer than the e xisting title: (ov erwr iting from the beginning of the title) title name: a title name: b title name: a overwriting title (a) existing title (b) after o verwriting when o verwriting in the middle of the title: title name: b 30 - 180 seconds will be cut off . title name: b title name: a title name: b when an existing title is overwritten, the title name may be changed according to the overwriting situations. before overwriting, read the following cases and note. overwriting title (a) existing title (b) existing title (c) after o verwriting pr og. a title name: a title name: b title name: a 30 - 180 seconds will be cut off . title name: c title name: c
34 en recording dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r connect the external source properly to the unit by using input jacks either ext2 (front) or ext1 (rear). when connecting an external equipment of monaural output to this unit, use audio l jack of ext2 (front). use commercially available s-video or video cable and an audio cable for this connection. connection to an external source 4. using [ k / l ], select e2 (front). press [ok]. 5. using [ k / l ], select the input jack type to connect. press [ok]. if you want to use s-video input jack, select s- video in. if you want to use video input (composite) jack, select video in. 6. press [setup] to exit. 4. using [ k / l ], select e1 (rear). press [ok]. 5. using [ k / l ], select the input jack type to connect. press [ok]. if you want to use s-video in jack, select s- video in. if you want to use video in (composite) jack, select video in. 6. press [setup] to exit. 1. press [setup]. 2. using [ k / l ], select required settings. press [ok]. 3. using [ k / l ], select video input. press [ok]. fr ont of this unit rear of this unit antenna au dio in video in l r au dio out video ou t (e1) in in out out s-video component video output l y p b /c b p r /c r r digi ta l au dio outpu t pcm / bitstrea m co axial to ext 2 in to ext 1 in another source (vcr camcorder etc.) video s- video au di o r l output video s -video au di o l r output s-video cab le au di o cab le video cab le or au dio in video in l r in s-video au di o cab le s-video cab le video cab le or or video input e2 (fr ont) video in e1 (rear) video in video input e2 (fr ont) s-video in e1 (rear) video in video input e2 (fr ont) video in e1 (rear) s-video in video input - e2 (fr ont) s-video in video in settings for an external source video input - e1 (rear) s-video in video in
35 en playing discs editing before you start changing the setup menu others espa?ol connections recording getting started to prevent accidental recording, editing or erasing the titles, you can protect them from the setting menu. 1 press [setup]. 2 using [ k / l ], select disc edit. press [ok]. disc menu will appear. 3 using [ k / l ], select disc protect off on. press [ok]. confirmation window will appear. 4 using [ k / l ], select yes. press [ok]. a disc will be protected. recording dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r before recording from an external source, see the instructions for the connection on page 34. recording from an external source 1. turn the tv and this unit on, and be sure to select the input of the tv to which the unit is connected. refer to the table on page 13. 2. press [open/close a ] to open the disc tray. place the disc to record properly. 3. press [open/close a ] to close the disc tray. 4. select the input of the unit which the external equipment is connected. (e2 or e1) ? to use the input jacks on the back of this unit, select e1 (rear) position by pressing [0], [0], [1] with the number buttons on the remote control. ? to use the input jacks on the front of this unit, select e2 (front) position by pressing [0], [0], [2] with the number buttons on the remote control. 5. select a recording mode by pressing [rec mode]. refer to recording mode on page 24. 6. press [record i ] on the unit to start recording. 7. press play on the external source to record from. 8. press [stop c ] on the unit to stop recording. 4 setting a disc to protect 1 2 3 4 note to cancel the disc protect: ? when you insert a disc protected with this unit, disc protect on off will appear instead of off on. to release the protect for the disc, select disc protect on off at step 3, then select yes. this operation may take a while to be recognized. hq sp spp lp ep slp (1hr) (2hr) (2.5hr) (3hr) (4hr) (6hr) this operation may take a while to be completed. no ye s disc pr otect off on no ye s disc pr otect on off settings for an external source (contd) 5 6 8 3 2 this operation may take a while to be completed. dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r 1 2 3 1
36 en recording note ? once you have finalized a disc recorded on dvd + r/ dvd - r, you cannot edit or record anything on that disc. ? there is no need to finalize dvd+rw discs. ? when you insert a dvd-rw disc finalized with this unit, undo finalize will appear instead of finalize. to release the finalizing for the disc, select undo finalize at step 3. * do not power off during finalization, this will result in malfunction. dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r you will need to finalize discs to play in other dvd players. finalizing may take several minutes up to an hour. a shorter recording period on the disc will require a longer time period for finalization. do not unplug the power cord during finalization. details are on page 25. 1 press [setup]. 2 using [ k / l ], select disc edit. press [ok]. disc menu will appear. 3 using [ k / l ], select finalize. press [ok]. confirmation window will appear. 4 using [ k / l ], select yes. press [ok]. finalizing will start. 5 finalizing is completed. 1 4 2 3 4 finalizing 100% finalizing 90% finaliz e no ye s to cancel finalizing... (dvd-rw only) ? to cancel finalizing at step 4, press [stop c ] , select yes with [ { / b ] , then press [ok] . finalizing is cancelled and the unit will be in stop mode. ? if appears when pressing [stop c ] , you cannot cancel finalizing because the finalizing has been in certain progress. ? when selecting no and press [ok] or [return] , finalizing will be continued. ? you cannot cancel finalizing the dvd+r/dvd-r disc once it has started. finalizin g 5 % do y ou want to cancel ? ye s no disc edi t edit disc name erase disc undo finaliz e disc pr otect off on playing the discs in other dvd players finalizing a disc this operation may take a while to be completed.
37 en playing discs editing before you start changing the setup menu others espa?ol connections recording getting started recording 6 2 3 4 5 dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r you can finalize discs automatically using auto finalize function. you can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. 1 press [setup]. 2 using [ k / l ], select recording. press [ok]. recording menu will appear. 3 using [ k / l ], select auto finalize. press [ok]. auto finalize menu will appear. 4 using [ k / l ], select disc full or end of timer rec. press [ok]. option window will appear. 5 using [ k / l ], select on. press [ok]. your setting will be activated. 6 press [setup] to exit. auto finalizing 1 au to finalize - end of timer rec off on au to finaliz e end of timer rec off disc full off au to finalize - disc ful l off on playing the discs in other dvd players (contd)
38 en playing discs before you play dvd discs, read the following information. guide to displays playable discs this unit is compatible to play the following discs. to play a dvd, make sure that it meets the requirements for region codes and color systems as described below. discs that have the following logos will play on the unit. other disc types are not guaranteed to play. color systems dvds are recorded in different color systems throughout the world. the most common color system is ntsc (which is used primarily in the united states and canada). this unit uses ntsc, so dvds you play must be recorded in the ntsc system. you cannot play dvds recorded in other color system . region codes this unit has been designed to play dvd discs with region one (1). dvds must be labeled for all regions or for region 1 in order to play on the unit. you cannot play dvds that are labeled for other regions. look for the symbols on the right on your dvds. if these region symbols do not appear on your dvd, you cannot play the dvd in this unit. the number inside the globe refers to region of the world. a dvd labeled for a specific region can only play on the unit with the same region code. pbc (playback control) for video cd this unit conforms to ver.1.1 and ver. 2.0 of video cd standard with pbc function. ver.1.1 (without pbc function): you can enjoy playback picture as well as music cd. ver.2.0 (with pbc function): while using a video cd with pbc function, pbc appears on the screen. note: when playing video cds with pbc function, some operations (e.g., track search and repeat tracks) cannot be performed. cancel pbc function temporarily to perform those operations (refer to page 70). hint for dvd playback the contents of dvd disc are generally divided into titles. titles may be further subdivided into chapters. logo disc d vd-r w (video mode , finaliz ed) d vd-r (video mode , finaliz ed) cd-d a (a udio cd) video cd cd-r (cd-d a forma t, mp3 files) cd-r w (cd-d a forma t, mp3 files) d vd-video d vd+r w d vd+r d vd+r doub le la y er tr ac k 1 t rack 2 t rack 3 t rack 4 t rack 5 star t rec. stop/star t stop rec. star t rec. stop rec. title 1 title 2 chapter 1 chapter 1 chapter 2 chapter 3 chapter 2 is a trademar k of dv d fo rm at/logo licensing cor por ation. information on dvd play press [display] to call up the display menu. this menu will give you the information on the playing disc. some operations are available while disc is playing. 1. indicates a disc type and a format mode . (format mode is displayed with dvd-rw/dvd-r (video mode) discs inserted.) note: in some descriptions on this manual, only one disc type is indicated as an example. 2. indicates a channel number. 3. indicates a recording mode and possible recording time left. 4. indicates a title number, chapter number and the time lapse of disc play. 5. each icon means: 6. indicates current disc status. : search : a udio : subtitle : angle : repeat : ma rk er : noise reduction : zoom : surround dv d+ rw 1 1 0:00:00 ch 2 1 4 5 2 5 2 6 hq(1hr) 1:01 3 3 you can play interactive software using menu screens. refer to instructions in the video cd.
1 press [standby-on ]. turn the tv on and be sure to select the input to which the unit is connected. 2 press [open/close a ] . the disc tray will open. 3 insert your disc with its label fac - ing up. align the disc to the disc tray guide. 4 press [open/close a ] to close the disc tray. title list will appear automatically. if you want to return to the playback while you are stopping temporarily, press [title] to resume play. to exit the title list, press [stop c ] . 5 using [ k / l ], select a desired title. press [ok]. pop-up window will appear. if you want to see disc information, press [ { ] when the first page of the title list is displayed or press [ k ] when the first title is selected but play, edit or overwrite is not highlighted. 6 using [ k / l ], select play. press [ok]. playback will start. 7 press [stop c ] to stop play - back. to eject the disc, press [open/ close a ] to open the disc tray, then remove the disc before turning the unit off. no disc nam e disc dvd+rw to tal ti t les 3 disc space used 0:30:48 disc protect of f make edits compatible needed no disc name disc dvd+ r to tal ti tles 5 disc space used 1:30:48 disc protect of f f inalize finalize d dv d+ r w dv d+ rw dv d+ r dv d+ r dv d- r w dv d- rw +v r dv d- r dv d- r +v r 39 en editing before you start changing the setup menu others espa?ol connections getting started recording playing discs playing discs 4 7 1 2 4 5 7 basic playback 6 4 playback this operation may take a while to be recognized. disc tr ay guide 1 sp (2hr) 2 3 nov/21/06 11:0 0 am ch12 sp nov/21/06 0:20:44 nov/22/06 11:3 5 am ch13 ep nov/22/06 0:10:33 empty title 1:37:52 sp(2hr ) e d i t o v e r w r i t e p l a y 6 1 sp (2hr) 2 3 nov/21/06 11:0 0 am ch12 sp nov/21/06 0:20:44 nov/22/06 11:3 5 am ch13 ep nov/22/06 0:10:33 empty title 1:37:52 sp(2hr ) note ? some discs may start playback automatically. ? you can also start playback by pressing [play b ] instead of [ok] at step 5. ? press [ b ] to display the next page, and press [ { ] to display the previous page. 1. disc name (default no disc name) 2. disc type (dvd+rw/dvd+r/dvd-rw/ dvd-r) 3. total number of title (include empty title ) 4. total time of recorded disc space 5. status of disc protection ( on is protected disc.) 6. making edits compatible/ finalize ? when dvd+rw disc is inserted: if edit for which make edits compatible is necessary is done, needed is displayed. not needed is not necessary. ? when dvd+r, dvd-rw or dvd-r disc is inserted: if finalize is done, finalized is displayed. otherwise, unfinalized is displayed.
40 en 1 in stop mode, press [title] to call up the mp3 menu. ? to exit the menu, press [title] again. 2 press [ k / l ] to select a desired folder (group) or track. press [ok]. when selecting track: playback will start. when selecting the folder: the files in folder will appear. press [ k / l ] to select the track or folder you want, then press [ok] . ? press [play b ] , [ok] or [ b ] to move to the lower hierarchies. ? press [ s ] or [return] to the previous hierarchy. hints for mp3 files: ? folders are known as groups, files are known as tracks. ? folders are accompanied by icon. ? mp3 files are accompanied by 3 icon. reproduction will start from the selected track and go to the next one in turn. ? the system can recognize up to 255 groups (or folders) and up to 999 tracks. ? the name of group and track can be displayed in up to 29 characters. unrecognizable characters will be replaced with asterisks. ? if there are no files in the folder, no files will be displayed. we recommends the files record - ed under the following circumstances is played back: ? sampling frequency: 44.1khz or 48khz. ? constant bit rate: 112kbps - 320kbps. playing discs 1 press [standby-on ]. turn the tv on and be sure to select the input to which the unit is connected. 2 press [open/close a ] to open the disc tray. the disc tray will open. 3 insert your disc with its label fac - ing up. align the disc to the disc tray guide. 4 press [play b ] to start play - back. playback will start. if you are playing a dvd-video disc or video cd with pbc function, a menu may appear. refer to page 41 for details about a disc menu. if you are playing a finalized dvd- r/dvd-rw disc, a title list will appear. 5 press [stop c ] to stop play - back. note ? some discs may start playback automatically. ? you can select images or information on the menu screen by activating pbc (playback control) function (page 70). note ? the audio source of mp3 files cannot be recorded as digital sound by an md or dat deck. ? files whose extension is other than .mp3(mp3) will not be listed in the mp3 menu. ? some unplayable folders or tracks may be listed in the mp3 menu due to the recording status. 1 2 5 4 1 2 playing mp3 disc file list disc name folder name 1 folder name 2 folder name 3 folder name 4 folder name 5 folder name 6 1 file name 1 2 file name 2 1/ 2 3 3 basic playback (contd) dv d- v dv d- v dv d- v dv d- v dv d- r dv d- r video dv d- r w dv d- rw video cd cd video cd video cd mp3 mp3
41 en editing before you start changing the setup menu others espa?ol connections getting started recording playing discs a dvd disc contains a disc menu that describes the contents or allows you to customize the playback. for example, the menu may offer choices for subtitle languages, special features, or chapter selection. sometimes these are displayed automatically when you start playback, otherwise only appear when you press [disc menu] . 1 press [disc menu]. disc menu will appear. if the feature is not available, may appear on the tv screen. 2 using [ k / l / { / b ], select an item. press [ok] to confirm. continue this step to set up all the features you want or to start playing the disc from the menu. disc menu button: displays a dvd disc menu which varies with the disc and may be the same as the title list. cursor k / l / { / b buttons: moves the cursor around screen. ok button: selects the currently highlighted menu option. number buttons: selects a numbered menu option (some discs only). (press [ok] later.) 3 press [disc menu] to exit the disc menu. some dvds have a title menu, which lists the titles available on them. it helps you to start playback at a specific title. 1 press [title]. the title menu will appear. if the feature is not available, may appear on the tv screen. 2 using [ k / l / { / b ], select a title to play. press [ok]. play will begin at the title you selected. title button: displays the title menu of a dvd disc which varies with the disc. cursor k / l / { / b buttons: moves the cursor around screen. ok button: selects the currently highlighted menu option. number buttons: selects a numbered menu option (some discs only). (press [ok] later.) 3 press [title] to exit the title menu. for video cds: when pbc (video cd only) in the cd playback mode menu is on and the display menu is not displayed, the video cd main menu will appear when inserting a disc or press [return] during playback. playing discs note ? menus vary among discs. refer to the information accompanying the disc for details. playing discs using the disc menu note ? [title] will not always be active with all dvds. ? menus vary among discs. refer to the information accompanying the disc for details. playing discs using the title menu 2 3 2 1 2 2 3 2 1 2 pause 1 during playback, press [pause f ]. play will pause and sound will be muted. 2 press [play b ] to resume play. 1 2 f basic playback (contd) dv d- v dv d- v dv d- v dv d- v dv d+ r w dv d+ rw dv d+ r dv d+ r dv d+ r dv d+ r dl dv d- r w dv d- rw +v r dv d- r dv d- r +v r dv d- r w dv d- rw video dv d- r dv d- r video cd cd video cd video cd mp3 mp3 dv d- v dv d- v dv d- v dv d- v dv d+ r w dv d+ rw dv d+ r dv d+ r dv d+ r dv d+ r dl dv d- r w dv d- rw +v r dv d- r dv d- r +v r dv d- r w dv d- rw video dv d- r dv d- r video dv d- v dv d- v dv d- v dv d- v note ? on dvds, set still mode to field in the setup menu if pictures in the pause mode are blurred . (refer to page 68 . )
42 en you can skip tv commercials by pressing [cm skip] , so that you can enjoy the recorded programs without interrupting. 1 during playback, press [cm skip]. normal play will start at 30 seconds ahead from the point you press [cm skip] . every time you press [cm skip] , the searching point will be extended by 30 seconds ahead. you can press up to 6 times (180 seconds). e.g. press [cm skip] once. playing discs resume play you can resume play from where you stopped playing the disc last. 1 during playback, press [stop c ]. the resume message will appear. 2 press [play b ]. in a few seconds, play will resume from the point at which it stopped last. you can resume play at the same point even if you turn off the unit. to cancel the resume play and start playing the disc from the beginning, press [stop c ] the second time while the play is stopped. fast forward / fast reverse 1 during playback, press [fwd d ] or [rev e ]. every time you press [ fwd d ] or [ rev e ] , approximate speed will be changed as follows. fast forward or fast reverse playback across titles (for dvd discs) or tracks (for mp3) is not possible. for video cds, approximate forward/reverse speeds are x2, x8, x16. for audio cds and mp3 files, approximate speed is fixed at x8 with sound. to return to the normal play, press [play b ]. 1 2 2 1 note ? for mp3 files, playback will resume from the beginning of the track at which playback was stopped. ? some video cds with the pbc function resume playback from the beginning of the track. skipping tv commercials during play 1 resume on x20 normal speed pla yba ck x2 x20 x5 x40 x40 note ? forward/reverse speed will be indicated with icons as follows. forward (approx. speed) x2: x20: x40: reverse (approx. speed) x5: x20: x40: special playback dv d- v dv d- v dv d- v dv d- v dv d+ r w dv d+ rw dv d+ r dv d+ r dv d+ r dv d+ r dl dv d- r w dv d- rw +v r dv d- r dv d- r +v r dv d- r w dv d- rw video dv d- r dv d- r video cd cd video cd video cd mp3 mp3 dv d- v dv d- v dv d- v dv d- v dv d+ r w dv d+ rw dv d+ r dv d+ r dv d+ r dv d+ r dl dv d- r w dv d- rw +v r dv d- r dv d- r +v r dv d- r w dv d- rw video dv d- r dv d- r video cd cd video cd video cd mp3 mp3 dv d- v dv d- v dv d- v dv d- v dv d+ r w dv d+ rw dv d+ r dv d+ r dv d+ r dv d+ r dl dv d- r w dv d- rw +v r dv d- r dv d- r +v r dv d- r w dv d- rw video dv d- r dv d- r video b cm skip 30 sec . (forwarding 30 seconds) playback will restart automatically.
43 en editing before you start changing the setup menu others espa?ol connections getting started recording playing discs playing discs slow forward / slow reverse play 1 during playback, press [pause f ]. then press [ fwd d ] or [ rev e ] . every time you press [fwd d ] or [rev e ] , approximate speed will be changed as follows. (the sound will remain muted.) to return to the normal play, press [play b ] . 1 3 2 1 x1/8 p ause x1/16 x1/8 x1/16 x1/3 x1/4 note ? forward/reverse speed will be indicated with icons as follows. forward (approx. speed) x1/16: x1/8: x1/3: reverse (approx. speed) x1/16: x1/8: x1/4: ? only slow forward playback is available for playing back video cds. rapid play rapid play function is available only during playback. available only on discs recorded in the dolby digital format, rapid play plays back in a slightly faster/slower speed while keeping the sound quality just as normal playback. 1 during playback, press [ rapid play] . note ? audio (language) setting cannot be changed while using this mode. ? this feature may not work at some point in a disc. ? audio is pcm during rapid play mode. 2 1 special playback (contd) dv d- v dv d- v dv d- v dv d- v dv d+ r w dv d+ rw dv d+ r dv d+ r dv d+ r dv d+ r dl dv d- r w dv d- rw +v r dv d- r dv d- r +v r dv d- r w dv d- rw video dv d- r dv d- r video step by step playback 1 during playback, press [pause f ]. play will pause and sound will be muted. 2 press [next g ] repeatedly. the play will advance one frame (or step) at a time when you press [next g ] with the sound muted. to play step by step backward: press [prev h ] repeatedly. every time you press the button, the play will go backward by one frame. ? press and hold [prev h ] / [ next g ] to reverse/ advance continuously. 3 press [play b ] to continue the normal playback. f dv d- v dv d- v dv d- v dv d- v dv d+ r w dv d+ rw dv d+ r dv d+ r dv d+ r dv d+ r dl dv d- r w dv d- rw +v r dv d- r dv d- r +v r dv d- r w dv d- rw video dv d- r dv d- r video video cd video cd dv d- v dv d- v dv d- v dv d- v dv d+ r w dv d+ rw dv d+ r dv d+ r dv d+ r dv d+ r dl dv d- r w dv d- rw +v r dv d- r dv d- r +v r dv d- r w dv d- rw video dv d- r dv d- r video video cd video cd 2 press [play b ] to continue the normal playback. b : press [ rapid play] once during playback. plays back approximately at 0.8 times of normal playback. b : press [ rapid play] twice during playback. plays back approximately at 1.3 times of normal playback. b : press [ rapid play] three times to play back in normal speed. no effects. note ? only step by step forward playback is available for playing back video cds.
44 en playing discs note ? when selecting a smaller factor than the current one, the zoom area will not be displayed. ? to exit the zoom menu, press [display] again at step 1. ? to cancel the zoom function, select x1.0 using [ k / l ] , then press [ok] . zoom 1 during playback, press [display]. display menu will appear. 2 using [ { / b ], select . press [ok]. zoom menu will appear. there are four options (x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate. 3 using [ k / l ], select a desired zoom factor to zoom. press [ok]. the zoom area will be displayed. 4 using [ k / l / { / b ], select a desired zoom position. press [ok]. the zoom play will start. 1 2 3 marker setup this feature allows you to assign a specific point on a disc to be called back later. 1 during playback, press [display]. display menu will appear. 2 using [ { / b ], select . press [ok]. marker setup menu will appear.

▲Up To Search▲

Price & Availability of MWR10D6

	To Download MWR10D6 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .